Search Thermo Fisher Scientific
Zertifikate
Invitrogen™
Large Cellophane
Das große Zellophan ist eine der Komponenten für das große Gel-Trocknungskit zum Trocknen von PAGE-Gelen. Das große Gel-Trocknungskit bietet eineWeitere Informationen
| Katalognummer | Menge |
|---|---|
| NC2200 | 100/ pkg. |
Katalognummer NC2200
Preis (EUR)
122,00
Each
-
Menge:
100/ pkg.
Preis (EUR)
122,00
Each
Das große Zellophan ist eine der Komponenten für das große Gel-Trocknungskit zum Trocknen von PAGE-Gelen. Das große Gel-Trocknungskit bietet eine schnelle und einfache Möglichkeit, Gele ohne Rissbildung dauerhaft zu trocknen und kann bis zu 1 bis 4 Mini-Gele oder ein großformatiges Gel aufnehmen.
Nur für Forschungszwecke. Nicht zur Verwendung bei diagnostischen Verfahren.
Specifications
ProduktlinieNovex™
ProdukttypGroßes Cellophan
Menge100/ pkg.
VersandbedingungRaumtemperatur
Unit SizeEach
Inhalt und Lagerung
100/Packung; bei Raumtemperatur lagern
Abbildungen
Large Gel Drying Kit Photo
浏览此商品的顾客同时也查看了
Dokumente und Downloads
Zertifikate
Nach Chargennummer oder Teil-Chargennummer suchen
Chargen-Nr.Certificate TypeDateCatalog Number(s)
2823634Certificate of Analysis16. Mai 2025NC2200
2977328Certificate of Analysis30. Okt. 2024NC2200
2893718Certificate of Analysis22. Okt. 2024NC2200
NONECertificate of Analysis17. Aug. 2023NC2200
NACertificate of Analysis18. Nov. 2022NC2200
5 Ergebnisse angezeigt, oben nach einem bestimmten Zertifikat suchen
Häufig gestellte Fragen (FAQ)
The Large Cellophane (Cat. No. NC2200) is a component of the Large Gel Drying Kit (Cat. No. NI2207). The Cellophane Dimensions are 22.35 cm × 22.85 cm. You will find these dimensions in the manual of the Drying Kit on page 4 (see link: https://assets.thermofisher.com/TFS-Assets/LSG/manuals/geldrying_man.pdf).
Find additional tips, troubleshooting help, and resources within our Protein Purification and Isolation Support Center.
Please see below for possible causes and solutions:
- Air trapped between cellophane layers. Apply adequate Gel-Drying solution to prevent bubbles between the gel and cellophane assembly.
- Tension on cellophane too strong. Take care not to stretch the cellophane during dryer assembly.
- Rough edges or small cracks on gel edges. Trim rough edges from the gel to eliminate starting points for cracks.
- Cellophane slips during drying. Make sure clamps hold all four edges of the dryer assembly firmly.
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.
Usually it is not necessary to peel off the cellophane. If your signal is very faint and you are concerned about getting an exposure, you can rub the top surface of your gel with a damp towel and then peel off the cellophane. Then air dry the gel for a few minutes and perform autoradiography.
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.
Gels turn white when they are dried too rapidly, usually in an environment that is too ventilated, drafty, or warm. You can remedy this problem by dabbing the gel with deionized water on a Kimwipe tissue to rehydrate the white areas. Re-dry the gel in a dark, dry, non-drafty place, such as a drawer or cabinet.
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.
The pore size of DryEase cellophane is 40 microns.
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.