The GeneTitan™ Hybridization, Wash, and Stain Kit for 3'-IVT Arrays contains pre-formulated solutions to process 3'-IVT array plates on the GeneTitan™ System. The reagents are formulated into the fewest number of individual components possible, reducing preparation and handling steps. With enhanced performance, fewer required reagents, and a simple protocol, target preparation has never been so easy.
The GeneTitan Hybridization, Wash, and Stain Kit for 3'-IVT Arrays includes two boxes:
The first box contains sufficient amounts of the hybridization and stain components to process one 96-array plate, four 24-array plates, or six 16-array plates. The hybridization components include the solutions required for preparation of the hybridization cocktail containing the target. The stain components include Stain Cocktail 1 and 3, Stain Cocktail 2, and the Array Holding Buffer. These solutions are used during the processing of the arrays in the GeneTitan System.
The second box includes Wash Buffer A and Wash Buffer B, also required for the processing of the arrays. There is sufficient Wash Buffer A and B to process one plate in any format. For each additional plate that is processed, an additional Wash Buffer A and B module must be purchased.
The Stain Cocktail 1 and 3, Stain Cocktail 2, Array Holding Buffer, and Wash Buffers A and B are ready-to-use solutions. The hybridization cocktail is prepared by combining the Hybridization Mix and nuclease-free water with the target prepared for the specific target labeling assay (IVT or WT).
The GeneTitan Hybridization, Wash, and Stain Kit for 3'-IVT Arrays should always be stored at 2 to 8° C.
Related LinksB2 Control Oligo (3nM)GeneTitan™ Hybridization, Wash, and Stain Kit for WT Array PlatesGeneTitan™ Wash Buffers A and B ModuleGeneChip™ Hybridization Control KitGenetitan™ miRNA Array Holding BufferFor Research Use Only. Not for use in diagnostic procedures.