Pack30 tool backpack + insulated hand tools starter kit

Three sizes of slot screwdrivers. #1 and #2 Phillips screwdrivers. Long nose pliers, heavy duty diagonal cutters and heavy-duty lineman combination pliers. All made from hardened chromium-molybdenum-vanadium (CMV) steel. All certified to 1000 volts AC and 1500V DC.

Fluke Pack30 tool backpack + insulated hand tools starter kit

The Fluke Pack30 Professional Tool Backpack loaded with the 1000 V insulated hand tools starter kit, containing the most often used insulated screwdrivers, electrical pliers and cutters. Three sizes of slot screwdrivers. #1 and #2 Phillips screwdrivers. Long nose pliers, heavy duty diagonal cutters and heavy-duty lineman combination pliers. All made from hardened chromium-molybdenum-vanadium (CMV) steel. All certified to 1000 volts AC and 1500V DC.

Key features
Fluke Pack30 Professional Tool Backpack

• 3 slotted insulated screwdrivers
• 2 Phillips insulated screwdrivers
• 3 insulated pliers
• Roll-up tool pouch

Fluke Pack30 Professional Tool Backpack:

• Over 30 pockets in six main storage compartments
• Rugged, waterproof bottom base protects tools, keeps backpack upright
• Stores, organizes and protects test equipment, hand tools, safety glasses, and personal items like keys, wallet and phone
• Special pocket for tablet PCs and laptops 12 inches (30 cm) wide or smaller

Slotted screwdrivers:

• Three different bladeforms
• Three handle lengths
• Phillips screwdrivers: #1 and #2 tips
• Two handle lengths

Long nose pliers with side cutter and gripping zones:

• Unique milled wave pattern gripping zones
• 4 gripping points for pulling round objects with superior grip that won't slip
• Straight, half-round, long and slim knurled jaws, specially profiled
• Side cutting edge for wire cutting

Heavy duty, high leverage diagonal cutter:

• Cuts hard materials including steel and piano wire
• Power joint and precision cutting edges

Heavy Duty Combination Pliers:

• Secure hold by aggressive serrated jaws and 4-point gripping hole
• Slim shape for better access to wires in tight spaces
• Powerful gripping jaw, yet 20% lighter weight than other designs

Recommendations for use and in-service care of Fluke Insulated Hand Tools:

• The following is guidance concerning the maintenance, inspection, retest and use of Fluke Insulated Hand Tools.
• Warning – to avoid electrical shock or personal injury:
• Keep fingers behind the finger guards of the tool. Never touch conductive parts.
• Always wear approved eye protection.
• Do not use in wet or damp locations. Do not use unless the tool is clean and dry.
• Do not apply excessive force or stress to the tool insulation that may cause damage. Examples include using the insulated surfaces as a fulcrum to pry or wedge or gripping insulated tool handles with other tools such as pliers or wrenches to increase torque or leverage.
• If the tool is used in a manner not specified, the protection may be impaired.

Storage:
Insulated hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These insulated hand tools should be stored separated from other tools to avoid mechanical damage or confusion with uninsulated tools. Furthermore, these insulated hand tools should be prevented from contact with excessively hot surfaces (for example steam pipes) or exposure to excessive UV- radiation.

Inspection before use:
Before use, each Insulated Hand Tool should be visually inspected by the user. If there is any doubt concerning the safety of the insulated hand tool, it should be subjected to examination by a competent person and if necessary retested to determine suitability or disposed of to prevent further use.

Temperature:
Insulated Hand Tools should be used only in environments having temperatures between –20°C and +70°C and, for tools marked C, between –40°C and +70°C.

Periodic examination and electrical retesting:
An annual visual examination by a suitably trained person is recommended to determine the suitability of the Insulated Hand Tool for further service. If an electrical retest is required by national regulation or in the case of doubt after visual examination, the applicable dielectric test of IEC 60900 for insulated hand tools should be performed.

Warranty: 1 year