Slide-A-Lyzer™ Dialysis Flasks
Slide-A-Lyzer™ Dialysis Flasks
Thermo Scientific™

Slide-A-Lyzer™ Dialysis Flasks

Facilitate removal of salts and small contaminants from proteins or macromolecules in sample volumes up to 250 mL. Each Slide-A-Lyzer Dialysis Flask provides flotation disks that when attached to the neck of the flask, allows the flask to float in a vertical position for simple and safe handling.
製品番号(カタログ番号)概要
87760Slide-A-Lyzer透析用フラスコ、2,000 MWCO、250 mL
87759Slide-A-Lyzer透析用フローティングディスク
87761Slide-A-Lyzer透析用フラスコ、3,500 MWCO、230 mL
87762Slide-A-Lyzer透析用フラスコ、10,000 MWCO、250 mL
87763Slide-A-Lyzer透析用フラスコ、20,000 MWCO、250 mL
5 オプション
製品番号(カタログ番号) 87760
価格(JPY)/ 4 flasks
価格69,900
お問い合わせください ›
***
概要:
Slide-A-Lyzer透析用フラスコ、2,000 MWCO、250 mL
一括またはカスタム形式をリクエストする
Slide-A-Lyzer Dialysis Flasks (2K, 3.5K, 10K, or 20K MWCO) facilitate simple and effective removal of buffer salts and small contaminants in sample volumes up to 250 mL. They are easy to use: add and remove sample using a serological pipette or by directly pouring the sample through a wide screw-cap opening at the top of the flask. No knots or clips are needed to seal the units. Slide-A-Lyzer Dialysis Flasks are manufactured using clean room conditions and have low-protein binding regenerated cellulose membranes to ensure maximum sample recovery and sample purity.
The dialysis flasks are available in distinct colors, corresponding to the pore size (MWCO) of the dialysis membrane: purple (20,000 Daltons), orange (10,000 Daltons), pink (3,500 Daltons), and blue (2,000 Daltons).

Slide-A-Lyzer Dialysis Flasks are constructed from two sheets of low-binding, regenerated-cellulose dialysis membrane that are hermetically sealed on either side of an inert plastic body. The membrane and flask materials are compatible with most laboratory buffers.

Features of Slide-A-Lyzer Dialysis Flasks:
Easy to use—simply pipette or pour sample into flask and begin dialysis
Fast dialysis—flat flask chamber with two membranes provides high surface area to volume ratio, enabling dialysis of a 250 mL sample in 8 hours to overnight
High recovery—rectangular flask design maximizes recovery of entire sample volume via opening at top of flask
Multiple molecular-weight cut offs—select the membrane MWCO that best suits your sample's molecular weight

Dialysis membrane specifications:
Composition: regenerated-cellulose
Thickness: 0.9–1.2 mil (22.5 to 30 μm); 2K MWCO = 2 mil (50 μm)
Hydration time required before use: 2 minutes
Glycerol content: trace (10K MWCO content is 21%)
Sulfur content: 0.04–0.17%
Heavy metals content: trace

With Slide-A-Lyzer Dialysis Flasks, typical low-molecular weight contaminant removal, buffer exchange, and desalting can be accomplished in eight hours to overnight. The rate of dialysis depends on a variety of factors, including sample volume, size and shape of the molecule being dialyzed, agitation, and temperature. Minimum dialysis time must be determined empirically for each specific system.

For Research Use Only. Not for use in diagnostic procedures.
仕様
概要Slide-A-Lyzer透析用フラスコ、2,000 MWCO、250 mL
精製標的緩衝液交換、タンパク質
セルロース膜、透析
フォーマット細胞培養フラスコ(T75)
MWCO2.0 kDa
製品ラインSlide-A-Lyzer™
数量4フラスコ
サンプル量(メートル法)250 mL
Unit Size4 flasks
組成および保存条件
受け取り後、製品は室温で保存してください 製品は室温で出荷されます。