iBlot 3 Western Blot Transfer System

The next generation of performance and convenience

The iBlot 3 Western Blot Transfer System combines an innovative, robust design that delivers exceptional performance and convenience with proven iBlot technology. The iBlot 3 System is a self-contained, plug-and-play system, with an integrated power supply and pre-packaged ready-to-use transfer stacks. Setup, teardown, and cleanup only takes minutes compared with the much more cumbersome and hands-on steps required for wet-tank transfer.

Request a demo  Register your device

Learn how the iBlot 3 Transfer System delivers equivalent or better transfer efficiency than wet transfer, and in a fraction of the time.

Download app note

The next generation of protein transfer
Video Player is loading.
Current Time 0:00
Duration 0:58
Loaded: 0.00%
Stream Type LIVE
Remaining Time 0:58
 
1x
    • Chapters
    • descriptions off, selected
    • captions off, selected
    • en (Main), selected

    Maximum productivity

    Now you can perform reliable, high-quality transfers fast—in as few as 3 minutes. You can also save time that would be spent waiting for transfer device availability. Two independently controlled transfer stations allow you to share the device with your coworker while simultaneously running four mini gels or two midi gels with two different programs. In addition, you can reduce method setup time by selecting preprogrammed methods from the user-friendly touchscreen interface. Programs can also be customized to fit your needs.

    iBlot 3 Transfer Stacks, Low Fluorescence PVDF

    Low fluorescence PVDF membranes have minimal autofluorescence, enabling exceptional signal to noise and high-quality fluorescent multiplexing.

    Learn more 

    Excellent transfer efficiency

    With the iBlot 3, you can achieve as good or better protein transfer efficiency compared with wet tank transfer and other rapid transfer methods.

    The iBlot 3 system demonstrates better transfer efficiency. (A) Hsp70: Invitrogen NuPAGE 4–12% Bis-Tris mini gels were loaded with 20, 15, 10, 5, 2.5, 1.25, 0.625, and 0.312 μg of A431 lysate per lane, respectively. After gel electrophoresis, the proteins were transferred using the method and conditions shown above. Immunoprocessing was completed using the Invitrogen Bandmate Automated Western Blot Processor. Blots were incubated with Thermo Scientific Pierce Clear Milk Blocking Buffer for 30 minutes. Hsp70 primary antibody (1:1,000 in clear milk) was added to blots and incubated for 12 hours at room temperature. Primary antibody was removed and GAM-HRP secondary antibody (1:120,000 in TBST) was added to blots and incubated for 2 hours. Thermo Scientific SuperSignal West Dura chemiluminescent substrate was used for detection. Invitrogen iBright FL1500 Imaging System was used for image capture. Local background corrected volume per lysate was plotted for each lane. (B) 4EBP1: Invitrogen Novex 16% Tricine mini gels were loaded with 10, 5, 2.5, 1.25, 0.625, 0.312, 0.156, and 0.078 μg of A431 lysate per lane, respectively. After gel electrophoresis, the proteins were transferred using the method and conditions shown above. Immunoprocessing was completed using the Bandmate Automated Western Blot Processor. Blots were incubated with Pierce Clear Milk Blocking Buffer for 30 minutes. 4EBP1 primary antibody (1:1,000 in clear milk) was added to blots and incubated for 12 hours at room temperature. Primary antibody was removed and GAR-HRP secondary antibody (1:175,000 in TBST) was added to blots and incubated for 2 hours. SuperSignal West Dura chemiluminescent substrate was used for detection. The iBright FL1500 instrument was used for image capture. Local background corrected volume per lysate was plotted for each lane. Note: GAM = goat anti-mouse, HRP = horse radish peroxidase, TBST = tris-buffered saline with Tween™ (solution), GAR = goat anti-rabbit.

    Consistent, reproducible results

    The pre-assembled, single-use consumables and ultra-fast transfer methods eliminate variability—helping ensure consistent and repeatable results compared with classical methods. In addition, the robust design with built-in cooling reduces heat buildup, facilitating run-to-run consistency.

    The iBlot 3 device delivers consistent results. A serial dilution of Thermo Scientific HEK293 lysate (lysed in Thermo Scientific RIPA buffer) was loaded onto four Invitrogen Bolt 4–12% Bis Tris plus gels. Protein loads from lane 1–11, left to right (in μg) were: 10, 5, 2.5, 1.25, 0.625, 0.312, 0.156, 0.078, 0.039, 0.020, and 0.010. Invitrogen iBright Prestained Protein Ladder (2 μL) was loaded into lane 12. MES SDS running buffer was used for gel electrophoresis. Proteins were transferred using the iBlot 3 Western Blot Transfer Device and iBlot 3 Transfer Stacks, Midi, NC using the broad range (30–250 kDa) preprogrammed transfer method (25V, 6 min, low cooling). Blots were then blocked with Thermo Scientific Pierce Clear Milk Blocking Buffer (Cat. No. 37587) and were then probed using primary antibodies raised against EGFR, calreticulin, and p23 (Cat. Nos. PA1-1110, PA1-903, and MA3-414, respectively) in clear milk for 12 hours. Secondary antibodies (AFP-GAR-800 (Cat. No. A32735), AFP-GAM-488 (Cat. No. A32723), AF-GAChk-546 (Cat. No. A11040) were prepared in TBST and added to the blots for 2 hours. Immunoprocessing was completed on the Invitrogen Bandmate Automated Western Blot Processor. Imaging was completed on the Invitrogen iBright FL1500 Imaging System.

    Rachel Biggs, Ph.D. Candidate, Biomedical Science

    Rachel Biggs, Ph.D. Candidate, Biomedical Science

    Division of Cardiology, Department of Medicine
    Medical University of South Carolina

    "Since we have switched from old-school overnight wet transfers to the iBlot 3, we have had much better transfers, less incidences of bubbles, and it has saved us so much time. By transitioning to this method, we have shifted to incubating the nitrocellulose membrane in primary antibody overnight, which has given us much brighter bands when imaging. I have also used the BioRad Turbo Transfer System, and I have to say I prefer the iBlot 3. It is a full minute faster and the clean-up is much easier. Also, the instructions provided with the machine are very easy to follow. Even my undergraduate volunteers could use the machine without assistance.”

    Upgrade program

    Are you still using an original iBlot or iBlot 2 device? Learn more about our incentive program to upgrade to an iBlot 3 device.

    Transfer stack electrode recycling

    The copper electrodes in the iBlot 3 Transfer Stacks can be recycled.

    Learn how to recycle copper electrodes

    Specifications
    Capacity1–4 mini, or 1–2 midi
    Gel Size 8 x 8 cm, 8 x 13 cm, 13.5 x 10.8 cm
    ChemistriesTris-glycine, bis-tris, tris-acetate, tricine
    Compatibility1.0–1.5 mm thick gels
    Transfer time3–8 min
    Transfer bufferNo buffer required
    ProgramsPre-programmed with three methods for transfer of proteins from various gel types or create custom programs
    Power supplyInternal (no additional power supply needed)
    Dimensions44 x 30 x 18.25 cm
    Weight8.3 kg
    Electrical Parameters100–240 V, 50/60 Hz, 6.3 A

    The iBlot 3 Western Blot Transfer System is based on the dry blotting concept, utilizing an exceptional gel matrix technology. The iBlot 3 Transfer Stack consists of a Bottom Stack and a Top Stack sandwiching a pre-run gel and a nitrocellulose (0.2 µm) or PVDF (0.2 µm) membrane. The iBlot 3 Transfer Stack is assembled with the blotting membrane on the anode side, and a pre-run gel on the cathode side.

    Schematic of iBlot 3 Transfer Stack showing the flow of current

    iBlot 3 Transfer Stack

    Complete transfer of proteins from the gel to the blotting membrane is accomplished in as few as three minutes. The rapid transfer without the need for external power supply or premade buffers is possible due to the following features of the iBlot 3 Western Blot Transfer System:

    • The gel matrix of the Bottom and Top Stack incorporate the appropriate anode and cathode buffers to act as ion reservoirs. This format eliminates the need for premade buffers or soaked filter paper, and minimizes handling that can lead to inconsistent performance.
    • The copper anode does not generate oxygen gas as a result of water electrolysis, resulting in increased transfer consistency. Conventional inert electrodes present in other blotting systems result in oxygen generation, which can result in blotting distortion.
    • The design of the iBlot 3 Western Blot Transfer System reduces the distance between the electrodes and the integrated power supply. This excellent design combined with the gel matrix technology of iBlot 3 Transfer Stacks allows the system to generate high field strength and increase the transfer speed.

    How to use the iBlot 3 Western Blot Transfer System

    Learn how to transfer your proteins from polyacrymide gels to nitrocellulose or PDVF membranes in as few as 3 minutes with this detailed step-by-step video.

    iBlot 3 Starter Kits

    Get a jumpstart and save with our starter kits!

    Our starter kits contain everything you need to start transferring your proteins, including the iBlot 3 Western Blot Transfer Device and nitrocellulose, PVDF, or low fluorescence PVDF transfer stacks.

    iBlot 3 device and consumables

    Catalog # Name Size Price (USD) Qty
    IB34003 iBlot™ 3 Transfer Stacks, midi, low-fluorescence PVDF Each
    331.00
    IB33002 iBlot™ 3 Transfer Stacks, mini, nitrocellulose, 10 Stacks Each
    220.65

    Online Exclusive

    228.00
    Save 7.35 (3%)
    A56727 iBlot™ 3 Western Blot Transfer Device, with extended warranty, 1 device with warranty Each
    4,110.65

    Online Exclusive

    4,475.00
    Save 364.35 (8%)
    IB33001 iBlot™ 3 Transfer Stacks, midi, nitrocellulose, 10 Stacks Each
    273.65

    Online Exclusive

    286.00
    Save 12.35 (4%)
    IB34002 iBlot™ 3 Transfer Stacks, mini, PVDF, 10 Stacks Each
    250.65

    Online Exclusive

    261.00
    Save 10.35 (4%)
    IB31001 iBlot™ 3 Western Blot Transfer Device, 1 device Each
    4,383.65

    Online Exclusive

    4,770.00
    Save 386.35 (8%)
    IB34004 iBlot™ 3 Transfer Stacks, mini, low-fluorescence PVDF Each
    278.00
    IB34001 iBlot™ 3 Transfer Stacks, midi, PVDF, 10 Stacks Each
    297.65

    Online Exclusive

    311.00
    Save 13.35 (4%)

    iBlot 3 warranty options

    Catalog NumberNameSize

    ZGEXSCIBLOT3

    1-Year Rapid Exchange Extended Warranty

    1 year

    ZG03SCIBLOT31-Year ABRC Support Extended Warranty1 year
    ZG04SCIBLOT31-Year ABRC Support Plus Extended Warranty1 year
    Note: Contact your local sales representative to get a price quote for any of the extended warranty options.

    iBlot 2 consumables

    Catalog # Name Size Price (USD) Qty
    IB23002 iBlot™ 2 Transfer Stacks, nitrocellulose, mini, 10 Stacks Each
    226.65

    Online Exclusive

    243.00
    Save 16.35 (7%)
    IB23001 iBlot™ 2 Transfer Stacks, nitrocellulose, regular size, 10 Stacks Each
    300.00
    IB24002 iBlot™ 2 Transfer Stacks, PVDF, mini, 10 Stacks Each
    256.65

    Online Exclusive

    276.00
    Save 19.35 (7%)
    IB24001 iBlot™ 2 Transfer Stacks, PVDF, regular size, 10 Stacks Each
    305.65

    Online Exclusive

    329.00
    Save 23.35 (7%)

    Still using your original iBlot or iBlot 2 device? Upgrade to an iBlot 3 Dry Blotting System Today.

    iBlot 3 Warranty and Service Contract Offerings

    Each iBlot 3 device comes with a one-year warranty. If your iBlot 3 device requires repair while under warranty, it can be sent to our Global Repair Center and all costs for shipping, labor, and parts for repairs are covered.

    To keep your system up and running, we recommend a service contract. These service contracts can be purchased at the time of the instrument sale and honored during the initial warranty period. The following is available for iBlot 3:

    Rapid Exchange (REX)*

    With the Rapid Exchange Service Plan, if your iBlot 3 device requires repair, it can be exchanged for a replacement factory-refurbished device at no additional cost, usually arriving in two business days. Thermo Fisher Scientific is offering Rapid Exchange purchase incentives—SKUs A56727, A56728, and A56729 include iBlot 3 with two years of Rapid Exchange (REX)* for the price of one year.

    ABRC Support**

    With ABRC Support, your iBlot 3 device can be sent to the Global Repair Center. Manufacturer trained technicians will repair the instrument and it will be returned to you in 21 business days.

    ABRC Support Plus**

    With ABRC Support Plus, your iBlot 3 device can be sent to the Global Repair Center. Manufacturer trained technicians will repair the instrument and it will be returned to you in 21 business days. While your device is at the Repair Center, a loaner instrument will be sent to prevent any downtime.

    For a system that is already in your lab, request a service quote tailored to your lab’s budget and needs. Use the Service Selection Tool to receive a customized quote.

    *A56727, A56728, and A56729 and REX are not available in all regions.

    **ABRC Support and ABRC Support Plus not available in all regions. Please contact your local sales representative or visit Contact Us.

    The next generation of protein transfer
    Video Player is loading.
    Current Time 0:00
    Duration 0:58
    Loaded: 0.00%
    Stream Type LIVE
    Remaining Time 0:58
     
    1x
      • Chapters
      • descriptions off, selected
      • captions off, selected
      • en (Main), selected

      Maximum productivity

      Now you can perform reliable, high-quality transfers fast—in as few as 3 minutes. You can also save time that would be spent waiting for transfer device availability. Two independently controlled transfer stations allow you to share the device with your coworker while simultaneously running four mini gels or two midi gels with two different programs. In addition, you can reduce method setup time by selecting preprogrammed methods from the user-friendly touchscreen interface. Programs can also be customized to fit your needs.

      iBlot 3 Transfer Stacks, Low Fluorescence PVDF

      Low fluorescence PVDF membranes have minimal autofluorescence, enabling exceptional signal to noise and high-quality fluorescent multiplexing.

      Learn more 

      Excellent transfer efficiency

      With the iBlot 3, you can achieve as good or better protein transfer efficiency compared with wet tank transfer and other rapid transfer methods.

      The iBlot 3 system demonstrates better transfer efficiency. (A) Hsp70: Invitrogen NuPAGE 4–12% Bis-Tris mini gels were loaded with 20, 15, 10, 5, 2.5, 1.25, 0.625, and 0.312 μg of A431 lysate per lane, respectively. After gel electrophoresis, the proteins were transferred using the method and conditions shown above. Immunoprocessing was completed using the Invitrogen Bandmate Automated Western Blot Processor. Blots were incubated with Thermo Scientific Pierce Clear Milk Blocking Buffer for 30 minutes. Hsp70 primary antibody (1:1,000 in clear milk) was added to blots and incubated for 12 hours at room temperature. Primary antibody was removed and GAM-HRP secondary antibody (1:120,000 in TBST) was added to blots and incubated for 2 hours. Thermo Scientific SuperSignal West Dura chemiluminescent substrate was used for detection. Invitrogen iBright FL1500 Imaging System was used for image capture. Local background corrected volume per lysate was plotted for each lane. (B) 4EBP1: Invitrogen Novex 16% Tricine mini gels were loaded with 10, 5, 2.5, 1.25, 0.625, 0.312, 0.156, and 0.078 μg of A431 lysate per lane, respectively. After gel electrophoresis, the proteins were transferred using the method and conditions shown above. Immunoprocessing was completed using the Bandmate Automated Western Blot Processor. Blots were incubated with Pierce Clear Milk Blocking Buffer for 30 minutes. 4EBP1 primary antibody (1:1,000 in clear milk) was added to blots and incubated for 12 hours at room temperature. Primary antibody was removed and GAR-HRP secondary antibody (1:175,000 in TBST) was added to blots and incubated for 2 hours. SuperSignal West Dura chemiluminescent substrate was used for detection. The iBright FL1500 instrument was used for image capture. Local background corrected volume per lysate was plotted for each lane. Note: GAM = goat anti-mouse, HRP = horse radish peroxidase, TBST = tris-buffered saline with Tween™ (solution), GAR = goat anti-rabbit.

      Consistent, reproducible results

      The pre-assembled, single-use consumables and ultra-fast transfer methods eliminate variability—helping ensure consistent and repeatable results compared with classical methods. In addition, the robust design with built-in cooling reduces heat buildup, facilitating run-to-run consistency.

      The iBlot 3 device delivers consistent results. A serial dilution of Thermo Scientific HEK293 lysate (lysed in Thermo Scientific RIPA buffer) was loaded onto four Invitrogen Bolt 4–12% Bis Tris plus gels. Protein loads from lane 1–11, left to right (in μg) were: 10, 5, 2.5, 1.25, 0.625, 0.312, 0.156, 0.078, 0.039, 0.020, and 0.010. Invitrogen iBright Prestained Protein Ladder (2 μL) was loaded into lane 12. MES SDS running buffer was used for gel electrophoresis. Proteins were transferred using the iBlot 3 Western Blot Transfer Device and iBlot 3 Transfer Stacks, Midi, NC using the broad range (30–250 kDa) preprogrammed transfer method (25V, 6 min, low cooling). Blots were then blocked with Thermo Scientific Pierce Clear Milk Blocking Buffer (Cat. No. 37587) and were then probed using primary antibodies raised against EGFR, calreticulin, and p23 (Cat. Nos. PA1-1110, PA1-903, and MA3-414, respectively) in clear milk for 12 hours. Secondary antibodies (AFP-GAR-800 (Cat. No. A32735), AFP-GAM-488 (Cat. No. A32723), AF-GAChk-546 (Cat. No. A11040) were prepared in TBST and added to the blots for 2 hours. Immunoprocessing was completed on the Invitrogen Bandmate Automated Western Blot Processor. Imaging was completed on the Invitrogen iBright FL1500 Imaging System.

      Rachel Biggs, Ph.D. Candidate, Biomedical Science

      Rachel Biggs, Ph.D. Candidate, Biomedical Science

      Division of Cardiology, Department of Medicine
      Medical University of South Carolina

      "Since we have switched from old-school overnight wet transfers to the iBlot 3, we have had much better transfers, less incidences of bubbles, and it has saved us so much time. By transitioning to this method, we have shifted to incubating the nitrocellulose membrane in primary antibody overnight, which has given us much brighter bands when imaging. I have also used the BioRad Turbo Transfer System, and I have to say I prefer the iBlot 3. It is a full minute faster and the clean-up is much easier. Also, the instructions provided with the machine are very easy to follow. Even my undergraduate volunteers could use the machine without assistance.”

      Upgrade program

      Are you still using an original iBlot or iBlot 2 device? Learn more about our incentive program to upgrade to an iBlot 3 device.

      Transfer stack electrode recycling

      The copper electrodes in the iBlot 3 Transfer Stacks can be recycled.

      Learn how to recycle copper electrodes

      Specifications
      Capacity1–4 mini, or 1–2 midi
      Gel Size 8 x 8 cm, 8 x 13 cm, 13.5 x 10.8 cm
      ChemistriesTris-glycine, bis-tris, tris-acetate, tricine
      Compatibility1.0–1.5 mm thick gels
      Transfer time3–8 min
      Transfer bufferNo buffer required
      ProgramsPre-programmed with three methods for transfer of proteins from various gel types or create custom programs
      Power supplyInternal (no additional power supply needed)
      Dimensions44 x 30 x 18.25 cm
      Weight8.3 kg
      Electrical Parameters100–240 V, 50/60 Hz, 6.3 A

      The iBlot 3 Western Blot Transfer System is based on the dry blotting concept, utilizing an exceptional gel matrix technology. The iBlot 3 Transfer Stack consists of a Bottom Stack and a Top Stack sandwiching a pre-run gel and a nitrocellulose (0.2 µm) or PVDF (0.2 µm) membrane. The iBlot 3 Transfer Stack is assembled with the blotting membrane on the anode side, and a pre-run gel on the cathode side.

      Schematic of iBlot 3 Transfer Stack showing the flow of current

      iBlot 3 Transfer Stack

      Complete transfer of proteins from the gel to the blotting membrane is accomplished in as few as three minutes. The rapid transfer without the need for external power supply or premade buffers is possible due to the following features of the iBlot 3 Western Blot Transfer System:

      • The gel matrix of the Bottom and Top Stack incorporate the appropriate anode and cathode buffers to act as ion reservoirs. This format eliminates the need for premade buffers or soaked filter paper, and minimizes handling that can lead to inconsistent performance.
      • The copper anode does not generate oxygen gas as a result of water electrolysis, resulting in increased transfer consistency. Conventional inert electrodes present in other blotting systems result in oxygen generation, which can result in blotting distortion.
      • The design of the iBlot 3 Western Blot Transfer System reduces the distance between the electrodes and the integrated power supply. This excellent design combined with the gel matrix technology of iBlot 3 Transfer Stacks allows the system to generate high field strength and increase the transfer speed.

      How to use the iBlot 3 Western Blot Transfer System

      Learn how to transfer your proteins from polyacrymide gels to nitrocellulose or PDVF membranes in as few as 3 minutes with this detailed step-by-step video.

      iBlot 3 Starter Kits

      Get a jumpstart and save with our starter kits!

      Our starter kits contain everything you need to start transferring your proteins, including the iBlot 3 Western Blot Transfer Device and nitrocellulose, PVDF, or low fluorescence PVDF transfer stacks.

      iBlot 3 device and consumables

      Catalog # Name Size Price (USD) Qty
      IB34003 iBlot™ 3 Transfer Stacks, midi, low-fluorescence PVDF Each
      331.00
      IB33002 iBlot™ 3 Transfer Stacks, mini, nitrocellulose, 10 Stacks Each
      220.65

      Online Exclusive

      228.00
      Save 7.35 (3%)
      A56727 iBlot™ 3 Western Blot Transfer Device, with extended warranty, 1 device with warranty Each
      4,110.65

      Online Exclusive

      4,475.00
      Save 364.35 (8%)
      IB33001 iBlot™ 3 Transfer Stacks, midi, nitrocellulose, 10 Stacks Each
      273.65

      Online Exclusive

      286.00
      Save 12.35 (4%)
      IB34002 iBlot™ 3 Transfer Stacks, mini, PVDF, 10 Stacks Each
      250.65

      Online Exclusive

      261.00
      Save 10.35 (4%)
      IB31001 iBlot™ 3 Western Blot Transfer Device, 1 device Each
      4,383.65

      Online Exclusive

      4,770.00
      Save 386.35 (8%)
      IB34004 iBlot™ 3 Transfer Stacks, mini, low-fluorescence PVDF Each
      278.00
      IB34001 iBlot™ 3 Transfer Stacks, midi, PVDF, 10 Stacks Each
      297.65

      Online Exclusive

      311.00
      Save 13.35 (4%)

      iBlot 3 warranty options

      Catalog NumberNameSize

      ZGEXSCIBLOT3

      1-Year Rapid Exchange Extended Warranty

      1 year

      ZG03SCIBLOT31-Year ABRC Support Extended Warranty1 year
      ZG04SCIBLOT31-Year ABRC Support Plus Extended Warranty1 year
      Note: Contact your local sales representative to get a price quote for any of the extended warranty options.

      iBlot 2 consumables

      Catalog # Name Size Price (USD) Qty
      IB23002 iBlot™ 2 Transfer Stacks, nitrocellulose, mini, 10 Stacks Each
      226.65

      Online Exclusive

      243.00
      Save 16.35 (7%)
      IB23001 iBlot™ 2 Transfer Stacks, nitrocellulose, regular size, 10 Stacks Each
      300.00
      IB24002 iBlot™ 2 Transfer Stacks, PVDF, mini, 10 Stacks Each
      256.65

      Online Exclusive

      276.00
      Save 19.35 (7%)
      IB24001 iBlot™ 2 Transfer Stacks, PVDF, regular size, 10 Stacks Each
      305.65

      Online Exclusive

      329.00
      Save 23.35 (7%)

      Still using your original iBlot or iBlot 2 device? Upgrade to an iBlot 3 Dry Blotting System Today.

      iBlot 3 Warranty and Service Contract Offerings

      Each iBlot 3 device comes with a one-year warranty. If your iBlot 3 device requires repair while under warranty, it can be sent to our Global Repair Center and all costs for shipping, labor, and parts for repairs are covered.

      To keep your system up and running, we recommend a service contract. These service contracts can be purchased at the time of the instrument sale and honored during the initial warranty period. The following is available for iBlot 3:

      Rapid Exchange (REX)*

      With the Rapid Exchange Service Plan, if your iBlot 3 device requires repair, it can be exchanged for a replacement factory-refurbished device at no additional cost, usually arriving in two business days. Thermo Fisher Scientific is offering Rapid Exchange purchase incentives—SKUs A56727, A56728, and A56729 include iBlot 3 with two years of Rapid Exchange (REX)* for the price of one year.

      ABRC Support**

      With ABRC Support, your iBlot 3 device can be sent to the Global Repair Center. Manufacturer trained technicians will repair the instrument and it will be returned to you in 21 business days.

      ABRC Support Plus**

      With ABRC Support Plus, your iBlot 3 device can be sent to the Global Repair Center. Manufacturer trained technicians will repair the instrument and it will be returned to you in 21 business days. While your device is at the Repair Center, a loaner instrument will be sent to prevent any downtime.

      For a system that is already in your lab, request a service quote tailored to your lab’s budget and needs. Use the Service Selection Tool to receive a customized quote.

      *A56727, A56728, and A56729 and REX are not available in all regions.

      **ABRC Support and ABRC Support Plus not available in all regions. Please contact your local sales representative or visit Contact Us.

      For Research Use Only. Not for use in diagnostic procedures.